Connect System 10° Vertical

Connect System 10° Vertical

The 10 ° Connect system Vertical is particularly suitable for large photovoltaic systems where there are no space problems and where very important energy power is required from the system. The vertical system is available only for 10 ° inclination which represents one of the most used inclinations in medium-large systems.
The system creates a grid composed of ballasts and photovoltaic modules linked together, making the rows integral with each other. This guarantees high wind resistance as confirmed by meticulous checks with fluid dynamics simulators and structural yielding loads, achieving excellent wind resistance results. All this in the face of reduced kg / m2 weights. Overall, the multi-module ballast system reports a roof load of about 15-20 kg / m2

Inclinations
ART.23010.CF

ART.23010.CF

ART. 23010.CRV

ART. 23010.CRV

ART.23010.CRTV

ART.23010.CRTV

Application

Any type of flat roof with a maximum slope of 5 °; on the ground, on beaten ground with inert material or flooring.

Module inclination
10°
Quantity per pallet
24
Ballast weight
20 Kg
Pallet dimensions
80 cm x 80 cm h = 42 cm
Distance between panels
da 75 cm a 90 cm
Total pallet weight
480 Kg
Orientation of the PV module
Vertical
PV panel size
Long side from 1560 to 1700 - Short side 1000 or similar.
Application

Any type of flat roof with a maximum slope of 5 °; on the ground, on beaten ground with inert material or flooring.

Module inclination
10°
Quantity per pallet
16
Ballast weight
38 Kg
Pallet dimensions
84 cm x 98 cm h = 60 cm
Distance between panels
da 75 cm a 90 cm
Total pallet weight
608 Kg
Orientation of the PV module
Vertical
PV panel size
Standard panel 1650x1000 or similar.
Application

Any type of flat roof with a maximum slope of 5 °; on the ground, on beaten ground with inert material or flooring.

Module inclination
10°
Quantity per pallet
16
Ballast weight
33 Kg
Pallet dimensions
70 cm x 98cm h = 60 cm
Distance between panels
da 75 cm a 90 cm
Total pallet weight
528 Kg
Orientation of the PV module
Vertical
PV panel size
Standard panel 1650x1000 or similar.
CONTACT US TO FIND OUT MORE
Document Thambnail

Download Technical Sheet

1.10 Mb

NEVER BEEN SO SIMPLE TO INSTALL!

With Sun Ballast Connect system, the company takes a further step forward in the direction of the corporate mission: to contribute to the reduction of renewable energy costs in order to achieve self-sufficiency.
In fact, this system simplifies and facilitates the installation of the photovoltaic system on flat roofs. The ballasts are equipped with a tooth that hold the module, preventing its release and improving its tightness. The distance between the rows is given by the module size, therefore, by squaring the first row, the rest comes by itself, easier and faster than ever.

The results for those who choose to use the new Sun Ballast-Connect system are concrete and tangible. From a technical point of view, there is an improvement in wind resistance with a lower roof load (kg / m2).
In economic terms, there is a real reduction in purchase, transport and installation times.

Can I have the details about the pallets?

Of course, please send an email to logistica@sunballast.com including the reference number of your order.

Is it possible to ground your system?

Yes, it can be grounded by means of connecting 2 panels as explained in the execution standard or using accessories (e.g. terminal and central braces) certified for grounding.

How long is your buckle?

Our buckle has a screw thread ≈ 3 cm long.

Can I install rails on your ballasts?

Yes.

Can I install solar thermal panels on your ballasts?

Yes, the technicians will suggest you the best solution after receiving the technical sheet and the assembly instructions of the panel.

Can I install the panels glass-glass?

Yes, by using the rails.

Is it possible to have a ballast produced according to our dimensional requirements?

Yes it is, we also produce custom ballasts to meet our clients’ needs.

Can I have black ballasts?

Yes, the minimum order is 1 pallet.

How long does the shipment take?

As soon as we receive the complete order (i.e. signed order, with delivery address + bank transfer report) we set shipment and delivery in 2/3 working days for northern Italy, 3/4 working days for central Italy, 4/5 working days for southern Italy/islands, 5/6 working days abroad.

Please note: for orders over €1500 we also have to wait for the credit to be transferred on our bank account.

Can you deliver the material on a vehicle with tail lift, as we do not have the equipment to unload the pallets?

Of course, we can send you a vehicle with hydraulic tail to unload the pallets.

Please note: we can do it up to 15/20 pallets; for larger amounts we supply a semi-truck, which is not provided with hydraulic tail.

Is there iron in the ballast?

Yes, in our ballasts there are 1-2 iron bars that enhance the resistance in handling and transport; should our ballast be damaged during the shipment (i.e. minute cracks occurring in the surface), it can be used anyway.

Is the buckle in the ballast in stainless steel?

No, it is made of zinc plated steel, as it permits to redo the thread if it strips while screwing (using the male screw M8)

Is it possible to drill the ballast?

Yes, our ballast can be drilled to insert Ø 9 mm expansion buckles. We recommend you to drill the ballasts in the central part.

What can I do if the buckle is oxydised?

Apply lubricant (e.g. WD40) or grease on the buckle.

Can I install the ballasts on any kind of flat surface?

Yes, our ballast can be installed on gravel, green roof, tarmac, concrete, ground.

What is the maximum tilt of the roof on which your system can be installed?

It can be installed on any roof with a maximum tilt of +5° or -5°.

Icon quotation

Request now a

Custom Quote

Ask a quotation!
Icon support

You need

Technical assistance?

CONTACT US NOW
Loader Gif
Loader Gif
Loader Gif
Loader Gif